View source for FTC TrainingBot Control Hub 20210920

= References =

* [https://docs.revrobotics.com/control-hub/ REV Robotics Control Hub reference]

= Control Hub REV-31-1595 Setup =

* Unit OrRAS01-RC =
* Out of the box was: FTC-kOWM

== Investigate Control Hub from sisters WiFi  ==

* in WiFi settings
** Opened the WiFi Settings window
** Found FTC-KOWN and connected to it
** password: "password"
** Pressed "Properties" link and found this
*** SSID FTC-kOWM
*** DNS servers: 192.164.43.187
*** address: 192.168.43.187
*** MAC: F8-34-41-C8-49-FC
* In browser
** Went to we page 192.168.43.1:8080
** Got a valid "Robot Controller Connection Info" page

== Update Control Hub from  to Sisters Wifi - zdome ==

* Connect to zdome Wifi 

== References ==

* Open [https://docs.revrobotics.com/control-hub/control-hub-gs Getting Started with Control Hub]
** Select [https://docs.revrobotics.com/control-hub/control-hub-gs/connect-to-the-control-hub-robot-control-console Connect to the Robot Controller Console]

== Download and Execute the  REV Hardware Client ==

Follow REV Hardware Client instructions

== Start up the REV Hardware Client ==

* Down load version 1.3.0: REV-Hardware-Client-Setup-1.3.0.exe
* Execute REV Hardware Client
* Connect Control Hub to Sisters using the cable in its box: 
** Plug the Control Hub into the PC using the orange USB-A to USB-C Cable that came with the Control Hub
* Select the Control Hub
* Select "Manage" from Hamburger icon (upper right)

== Update ==

* Control Hub Operating System
** Current Version 1.1.1
** Latest Version 1.1.2
* Robot Controller App
** current Version 5.4
** Latest Version 7.0
* Hub Firmware
** Current 1.8.2
** Latest 1.8.2
** don't update

== Updating WiFi Settings ==

* Change name: FTC-kOWM to OrRAS01-RC
* This is the SSID
* NOTE the naming convenstion IMPROTANT
** Control Hub: xxxx-RC
** Driver Station will be set latter to: xxxx-DS

== Tested ==
This gives me OnBot Java

* Connect to the OrRAS01-RC network
* Went to we page 192.168.43.1:8080
* Got a valid "Robot Controller Connection Info" page

= Depreciated =

= Unit 1 =

== Status ==
Sept 20, 2021

=== Self Inspect ===

* From Driver Station
** 3 dots"Self Inspect"
*** "Inspect Robot Controller"
 
* Model: Control Hub v1.0
* OS version: 7.1.2
* Hub Firmware 1.8.2
* Apps Installed
** Robot Controller: 5.4

=== About ===

* From Driver Station 
** 3 dots "About"
 
* App Version: 5.4
* Robot Vifi Protocol Version
* Network Connection Info
** Name: FTC 4K3g
** IP Address: 192.168.43.1
** Access Point SSID FTC-4K3g
** Passphrase: password
* App Build Time: 1/15/20 2:58 PM
* Control Hub OS Version: 1.0.1


== Update Driver Station App ==

* [https://www.firstinspires.org/sites/default/files/uploads/resource_library/ftc/updating-ftc-software-instructions.pdf Updating FTC Software Instructions]

On my old ZTE I have 5.4

* In gear icon WiFi disconnect FTC-4K3g
* Connected to zdome
* [https://www.firstinspires.org/sites/default/files/uploads/resource_library/ftc/updating-ftc-software-instructions.pdf Updating FTC Software Insturction]

== Update Firmware ==

* [https://docs.revrobotics.com/control-hub/managing-the-control-system/updating-firmware REV Robotics Updating Firmware]

* "Using the REV Hardware Client"