Difference between revisions of "Edison"
From wikidb
(→Links) |
(→On ubuntu dev box) |
||
(17 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
== Links == | == Links == | ||
+ | |||
+ | === Software === | ||
* [http://intel.com/edison/getstarted Getting Started] | * [http://intel.com/edison/getstarted Getting Started] | ||
Line 5: | Line 7: | ||
* [http://www.intel.com/support/edison/sb/CS-035180.htm Software downloads] | * [http://www.intel.com/support/edison/sb/CS-035180.htm Software downloads] | ||
* [http://www.intel.com/content/www/us/en/do-it-yourself/edison-new-features.html Intel Edison Developer Software Release] | * [http://www.intel.com/content/www/us/en/do-it-yourself/edison-new-features.html Intel Edison Developer Software Release] | ||
+ | * [https://learn.sparkfun.com/tutorials/loading-debian-ubilinux-on-the-edison ubuntu] | ||
+ | |||
+ | === General === | ||
+ | |||
* [http://www.intel.com/content/www/us/en/do-it-yourself/maker.html Intel Maker] | * [http://www.intel.com/content/www/us/en/do-it-yourself/maker.html Intel Maker] | ||
− | == Notes == | + | === Hardware === |
+ | |||
+ | * [http://www.dfrobot.com/index.php?route=product/product&product_id=1200 DFRobot] | ||
+ | * [https://www.sparkfun.com/categories/272 Spark Fun] | ||
+ | |||
+ | |||
+ | == configure == | ||
+ | * configure_edison | ||
+ | ** name: westhills | ||
+ | ** passwd: my dev passwd | ||
+ | ** wifi: zdome | ||
+ | ** wifi passwword: xxx | ||
+ | ** 10.0.0.229 | ||
+ | |||
+ | == Flash Edison == | ||
+ | * Intel board - xxx | ||
+ | * [https://communities.intel.com/docs/DOC-23200 How to Flash Edison] | ||
+ | * Plug the board in with two USB cables | ||
+ | |||
+ | === On ubuntu dev box === | ||
+ | |||
+ | * Dialog box came up | ||
+ | ** Removeable medium is inserted | ||
+ | ** Open in File Manager | ||
+ | ** OK | ||
+ | ** Lightweight file manager came up PCManFM 1.2.0 | ||
+ | * On my dev box | ||
+ | cd /media/eepp/Edison | ||
+ | rm -rf * | ||
+ | rm -rf \.* | ||
+ | * [http://www.intel.com/support/edison/sb/CS-035180.htm Support & Downloads] | ||
+ | ** Select Yocto Complete Image | ||
+ | ** Downloaded edison-image-ww05-15.zip | ||
+ | unzip ~/Downloads/edison-image-ww05-15.zip | ||
+ | |||
+ | ==== On Edison ==== | ||
+ | |||
+ | |||
+ | root@westhills:~# uname -a | ||
+ | Linux westhills 3.10.17-poky-edison+ #1 SMP PREEMPT Wed Aug 20 16:09:18 CEST 2014 i686 GNU/Linux | ||
+ | |||
+ | === On ubuntu recover === | ||
+ | |||
+ | * Install dfu-util which is a open source program that implements USB DFU (USB Device Firmware Upgrade) protocol | ||
+ | sudo apt-get install dfu-util | ||
+ | * Extract the contents of the pre-built Edison image | ||
+ | unzip ~/Downloads/edison-image-ww05-15.zip | ||
+ | |||
+ | * Run the script and then connect the Edison board using USB2.0 cable | ||
+ | ./flashall.sh | ||
+ | * NOTE: the script can take up to 5 minutes to complete the flashing | ||
+ | |||
+ | ==== On edison ==== | ||
+ | |||
+ | root@edison:~# uname -a | ||
+ | Linux edison 3.10.17-poky-edison+ #1 SMP PREEMPT Tue Oct 14 15:19:49 CEST 2014 i686 GNU/Linux | ||
+ | |||
+ | === On Edison under screen === | ||
+ | |||
+ | * boot up and log in | ||
+ | reboot ota | ||
+ | |||
+ | == Sparkfun == | ||
+ | === Hardware === | ||
+ | |||
+ | * [https://www.sparkfun.com/products/13024 Entel Edison 13024] | ||
+ | * [https://www.sparkfun.com/products/13039 Edison Console 13039] | ||
+ | * [https://www.sparkfun.com/products/13041 Edison Micro SD 13041] | ||
+ | |||
+ | == Working from Ubuntu == | ||
+ | |||
+ | === Install === | ||
+ | |||
+ | * [http://www.intel.com/support/edison/sb/CS-035335.htm Linux start guide]. | ||
+ | * [http://www.gnu.org/software/screen/ GNU Screen] | ||
+ | * [http://www.gnu.org/software/screen/manual/ Screen Documentation] | ||
+ | |||
+ | sudo apt-get install screen | ||
+ | sudo screen /dev/ttyUSB0 115200 | ||
+ | |||
+ | * Press Enter twice. A login screen is displayed. | ||
+ | * At the login prompt, type root and press Enter. | ||
+ | * Press Enter when prompted for a password. | ||
+ | |||
+ | === Setup === | ||
+ | |||
+ | == ubilinux == | ||
+ | |||
+ | * [https://learn.sparkfun.com/tutorials/loading-debian-ubilinux-on-the-edison ubilinux install] from a linux dev box | ||
+ | * [http://www.emutexlabs.com/ubilinux ubilinux] | ||
+ | * Got ubilinux-edison-141030.tar.gz | ||
+ | |||
+ | == Mac Notes == | ||
+ | === Setup === | ||
Downloaded arduino-1.5.3 for Mac | Downloaded arduino-1.5.3 for Mac | ||
Line 36: | Line 135: | ||
root@SugarLoaf:~# | root@SugarLoaf:~# | ||
− | == Flash Edison Mac == | + | === Flash Edison Mac === |
[[https://communities.intel.com/docs/DOC-23193?_ga=1.152982449.947813547.1371918071 Instructions]] | [[https://communities.intel.com/docs/DOC-23193?_ga=1.152982449.947813547.1371918071 Instructions]] |
Latest revision as of 00:07, 19 February 2015
Contents
Links
Software
- Getting Started
- Getting Started - Mac
- Software downloads
- Intel Edison Developer Software Release
- ubuntu
General
Hardware
configure
- configure_edison
- name: westhills
- passwd: my dev passwd
- wifi: zdome
- wifi passwword: xxx
- 10.0.0.229
Flash Edison
- Intel board - xxx
- How to Flash Edison
- Plug the board in with two USB cables
On ubuntu dev box
- Dialog box came up
- Removeable medium is inserted
- Open in File Manager
- OK
- Lightweight file manager came up PCManFM 1.2.0
- On my dev box
cd /media/eepp/Edison rm -rf * rm -rf \.*
- Support & Downloads
- Select Yocto Complete Image
- Downloaded edison-image-ww05-15.zip
unzip ~/Downloads/edison-image-ww05-15.zip
On Edison
root@westhills:~# uname -a Linux westhills 3.10.17-poky-edison+ #1 SMP PREEMPT Wed Aug 20 16:09:18 CEST 2014 i686 GNU/Linux
On ubuntu recover
- Install dfu-util which is a open source program that implements USB DFU (USB Device Firmware Upgrade) protocol
sudo apt-get install dfu-util
- Extract the contents of the pre-built Edison image
unzip ~/Downloads/edison-image-ww05-15.zip
- Run the script and then connect the Edison board using USB2.0 cable
./flashall.sh
- NOTE: the script can take up to 5 minutes to complete the flashing
On edison
root@edison:~# uname -a Linux edison 3.10.17-poky-edison+ #1 SMP PREEMPT Tue Oct 14 15:19:49 CEST 2014 i686 GNU/Linux
On Edison under screen
- boot up and log in
reboot ota
Sparkfun
Hardware
Working from Ubuntu
Install
sudo apt-get install screen sudo screen /dev/ttyUSB0 115200
- Press Enter twice. A login screen is displayed.
- At the login prompt, type root and press Enter.
- Press Enter when prompted for a password.
Setup
ubilinux
- ubilinux install from a linux dev box
- ubilinux
- Got ubilinux-edison-141030.tar.gz
Mac Notes
Setup
Downloaded arduino-1.5.3 for Mac
EdCiMac:~ edcepp$ screen /dev/cu.usbserial-AJ035QAV 115200 -L
Enter 0 to rescan for networks. Enter 1 to input a hidden network SSID. Enter a number between 2 to 4 to choose one of the listed network SSIDs: 4 Is zdome correct? [Y or N]: Y What is the network password?: ********** Initiating connection to zdome... Done. Network access should be available shortly, please check 'wpa_cli status'. Connected. Please go to 10.0.0.134 in your browser to check if this is correct. root@SugarLoaf:~# wpa_cli status Selected interface 'wlan0' bssid=b2:b2:dc:4c:0a:a8 ssid=zdome id=0 mode=station pairwise_cipher=CCMP group_cipher=TKIP key_mgmt=WPA2-PSK wpa_state=COMPLETED ip_address=10.0.0.134 address=fc:c2:de:33:14:d6 uuid=9b0ca892-ab2f-54f5-a2a8-d9c4baaadf33 root@SugarLoaf:~#
Flash Edison Mac
- Connect two USB cables
- Open a terminal screen and navigated to "cd /Volumes/Edison"
- Removed all files"rm -rf *" and "rm -rf \.*"
- Do a get info to see if it is MS-DOS(FAT16) - follow the next step (should be MS-DOS(FAT)
- exit the edison directory from the terminal so we
- use Disk utility to reflash
- [image] "Edison Yocto complete image Linux - Yocto"
- unzip and copy to Edison
screen /dev/cu.usbserial <no enter>
- tab
115200 -L
- log into root
- my typical passwd or not
- once in - this will erase every thing
reboot ota