Difference between revisions of "Edison"
From wikidb
(→Sparkfun) |
(→On ubuntu dev box) |
||
| (7 intermediate revisions by the same user not shown) | |||
| Line 29: | Line 29: | ||
== Flash Edison == | == Flash Edison == | ||
* Intel board - xxx | * Intel board - xxx | ||
| − | * | + | * [https://communities.intel.com/docs/DOC-23200 How to Flash Edison] |
| − | + | ||
| − | + | ||
* Plug the board in with two USB cables | * Plug the board in with two USB cables | ||
| − | * Lightweight file manager came up PCManFM 1.2.0 | + | |
| + | === On ubuntu dev box === | ||
| + | |||
| + | * Dialog box came up | ||
| + | ** Removeable medium is inserted | ||
| + | ** Open in File Manager | ||
| + | ** OK | ||
| + | ** Lightweight file manager came up PCManFM 1.2.0 | ||
| + | * On my dev box | ||
| + | cd /media/eepp/Edison | ||
| + | rm -rf * | ||
| + | rm -rf \.* | ||
| + | * [http://www.intel.com/support/edison/sb/CS-035180.htm Support & Downloads] | ||
| + | ** Select Yocto Complete Image | ||
| + | ** Downloaded edison-image-ww05-15.zip | ||
| + | unzip ~/Downloads/edison-image-ww05-15.zip | ||
| + | |||
| + | ==== On Edison ==== | ||
| + | |||
| + | |||
| + | root@westhills:~# uname -a | ||
| + | Linux westhills 3.10.17-poky-edison+ #1 SMP PREEMPT Wed Aug 20 16:09:18 CEST 2014 i686 GNU/Linux | ||
| + | |||
| + | === On ubuntu recover === | ||
| + | |||
| + | * Install dfu-util which is a open source program that implements USB DFU (USB Device Firmware Upgrade) protocol | ||
| + | sudo apt-get install dfu-util | ||
| + | * Extract the contents of the pre-built Edison image | ||
| + | unzip ~/Downloads/edison-image-ww05-15.zip | ||
| + | |||
| + | * Run the script and then connect the Edison board using USB2.0 cable | ||
| + | ./flashall.sh | ||
| + | * NOTE: the script can take up to 5 minutes to complete the flashing | ||
| + | |||
| + | ==== On edison ==== | ||
| + | |||
| + | root@edison:~# uname -a | ||
| + | Linux edison 3.10.17-poky-edison+ #1 SMP PREEMPT Tue Oct 14 15:19:49 CEST 2014 i686 GNU/Linux | ||
| + | |||
| + | === On Edison under screen === | ||
| + | |||
| + | * boot up and log in | ||
| + | reboot ota | ||
== Sparkfun == | == Sparkfun == | ||
| Line 58: | Line 98: | ||
=== Setup === | === Setup === | ||
| + | |||
| + | == ubilinux == | ||
| + | |||
| + | * [https://learn.sparkfun.com/tutorials/loading-debian-ubilinux-on-the-edison ubilinux install] from a linux dev box | ||
| + | * [http://www.emutexlabs.com/ubilinux ubilinux] | ||
| + | * Got ubilinux-edison-141030.tar.gz | ||
== Mac Notes == | == Mac Notes == | ||
Latest revision as of 00:07, 19 February 2015
Contents
Links
Software
- Getting Started
- Getting Started - Mac
- Software downloads
- Intel Edison Developer Software Release
- ubuntu
General
Hardware
configure
- configure_edison
- name: westhills
- passwd: my dev passwd
- wifi: zdome
- wifi passwword: xxx
- 10.0.0.229
Flash Edison
- Intel board - xxx
- How to Flash Edison
- Plug the board in with two USB cables
On ubuntu dev box
- Dialog box came up
- Removeable medium is inserted
- Open in File Manager
- OK
- Lightweight file manager came up PCManFM 1.2.0
- On my dev box
cd /media/eepp/Edison rm -rf * rm -rf \.*
- Support & Downloads
- Select Yocto Complete Image
- Downloaded edison-image-ww05-15.zip
unzip ~/Downloads/edison-image-ww05-15.zip
On Edison
root@westhills:~# uname -a Linux westhills 3.10.17-poky-edison+ #1 SMP PREEMPT Wed Aug 20 16:09:18 CEST 2014 i686 GNU/Linux
On ubuntu recover
- Install dfu-util which is a open source program that implements USB DFU (USB Device Firmware Upgrade) protocol
sudo apt-get install dfu-util
- Extract the contents of the pre-built Edison image
unzip ~/Downloads/edison-image-ww05-15.zip
- Run the script and then connect the Edison board using USB2.0 cable
./flashall.sh
- NOTE: the script can take up to 5 minutes to complete the flashing
On edison
root@edison:~# uname -a Linux edison 3.10.17-poky-edison+ #1 SMP PREEMPT Tue Oct 14 15:19:49 CEST 2014 i686 GNU/Linux
On Edison under screen
- boot up and log in
reboot ota
Sparkfun
Hardware
Working from Ubuntu
Install
sudo apt-get install screen sudo screen /dev/ttyUSB0 115200
- Press Enter twice. A login screen is displayed.
- At the login prompt, type root and press Enter.
- Press Enter when prompted for a password.
Setup
ubilinux
- ubilinux install from a linux dev box
- ubilinux
- Got ubilinux-edison-141030.tar.gz
Mac Notes
Setup
Downloaded arduino-1.5.3 for Mac
EdCiMac:~ edcepp$ screen /dev/cu.usbserial-AJ035QAV 115200 -L
Enter 0 to rescan for networks. Enter 1 to input a hidden network SSID. Enter a number between 2 to 4 to choose one of the listed network SSIDs: 4 Is zdome correct? [Y or N]: Y What is the network password?: ********** Initiating connection to zdome... Done. Network access should be available shortly, please check 'wpa_cli status'. Connected. Please go to 10.0.0.134 in your browser to check if this is correct. root@SugarLoaf:~# wpa_cli status Selected interface 'wlan0' bssid=b2:b2:dc:4c:0a:a8 ssid=zdome id=0 mode=station pairwise_cipher=CCMP group_cipher=TKIP key_mgmt=WPA2-PSK wpa_state=COMPLETED ip_address=10.0.0.134 address=fc:c2:de:33:14:d6 uuid=9b0ca892-ab2f-54f5-a2a8-d9c4baaadf33 root@SugarLoaf:~#
Flash Edison Mac
- Connect two USB cables
- Open a terminal screen and navigated to "cd /Volumes/Edison"
- Removed all files"rm -rf *" and "rm -rf \.*"
- Do a get info to see if it is MS-DOS(FAT16) - follow the next step (should be MS-DOS(FAT)
- exit the edison directory from the terminal so we
- use Disk utility to reflash
- [image] "Edison Yocto complete image Linux - Yocto"
- unzip and copy to Edison
screen /dev/cu.usbserial <no enter>
- tab
115200 -L
- log into root
- my typical passwd or not
- once in - this will erase every thing
reboot ota
