Difference between revisions of "Edison"
From wikidb
(→Install) |
(→Sparkfun) |
||
Line 17: | Line 17: | ||
* [http://www.dfrobot.com/index.php?route=product/product&product_id=1200 DFRobot] | * [http://www.dfrobot.com/index.php?route=product/product&product_id=1200 DFRobot] | ||
* [https://www.sparkfun.com/categories/272 Spark Fun] | * [https://www.sparkfun.com/categories/272 Spark Fun] | ||
+ | |||
+ | |||
+ | == configure == | ||
+ | * configure_edison | ||
+ | ** name: westhills | ||
+ | ** passwd: my dev passwd | ||
+ | ** wifi: zdome | ||
+ | ** wifi passwword: xxx | ||
+ | ** 10.0.0.229 | ||
+ | |||
+ | == Flash Edison == | ||
+ | * Intel board - xxx | ||
+ | * Under ubuntu | ||
+ | |||
+ | * https://communities.intel.com/docs/DOC-23200 How to Flash Edison] | ||
+ | * Plug the board in with two USB cables | ||
+ | * Lightweight file manager came up PCManFM 1.2.0 | ||
== Sparkfun == | == Sparkfun == |
Revision as of 17:32, 16 February 2015
Contents
Links
Software
- Getting Started
- Getting Started - Mac
- Software downloads
- Intel Edison Developer Software Release
- ubuntu
General
Hardware
configure
- configure_edison
- name: westhills
- passwd: my dev passwd
- wifi: zdome
- wifi passwword: xxx
- 10.0.0.229
Flash Edison
- Intel board - xxx
- Under ubuntu
- https://communities.intel.com/docs/DOC-23200 How to Flash Edison]
- Plug the board in with two USB cables
- Lightweight file manager came up PCManFM 1.2.0
Sparkfun
Hardware
Working from Ubuntu
Install
sudo apt-get install screen sudo screen /dev/ttyUSB0 115200
- Press Enter twice. A login screen is displayed.
- At the login prompt, type root and press Enter.
- Press Enter when prompted for a password.
Setup
Mac Notes
Setup
Downloaded arduino-1.5.3 for Mac
EdCiMac:~ edcepp$ screen /dev/cu.usbserial-AJ035QAV 115200 -L
Enter 0 to rescan for networks. Enter 1 to input a hidden network SSID. Enter a number between 2 to 4 to choose one of the listed network SSIDs: 4 Is zdome correct? [Y or N]: Y What is the network password?: ********** Initiating connection to zdome... Done. Network access should be available shortly, please check 'wpa_cli status'. Connected. Please go to 10.0.0.134 in your browser to check if this is correct. root@SugarLoaf:~# wpa_cli status Selected interface 'wlan0' bssid=b2:b2:dc:4c:0a:a8 ssid=zdome id=0 mode=station pairwise_cipher=CCMP group_cipher=TKIP key_mgmt=WPA2-PSK wpa_state=COMPLETED ip_address=10.0.0.134 address=fc:c2:de:33:14:d6 uuid=9b0ca892-ab2f-54f5-a2a8-d9c4baaadf33 root@SugarLoaf:~#
Flash Edison Mac
- Connect two USB cables
- Open a terminal screen and navigated to "cd /Volumes/Edison"
- Removed all files"rm -rf *" and "rm -rf \.*"
- Do a get info to see if it is MS-DOS(FAT16) - follow the next step (should be MS-DOS(FAT)
- exit the edison directory from the terminal so we
- use Disk utility to reflash
- [image] "Edison Yocto complete image Linux - Yocto"
- unzip and copy to Edison
screen /dev/cu.usbserial <no enter>
- tab
115200 -L
- log into root
- my typical passwd or not
- once in - this will erase every thing
reboot ota