Difference between revisions of "NUC D54250WYK"
From wikidb
(→Power Requirements) |
(→Power Requirements) |
||
Line 32: | Line 32: | ||
|- | |- | ||
|Camshift rotate demo driving wheels (no load) | |Camshift rotate demo driving wheels (no load) | ||
− | |0.57 to 0.66 | + | |0.57 to 0.66 + |
+ | |} | ||
+ | |||
+ | {| class="wikitable" | ||
+ | !Supply voltage | ||
+ | !Current (amps) | ||
+ | |Watts | ||
+ | |+Power Requirement as a function of voltage | ||
+ | |- | ||
+ | |18 | ||
+ | |0.55 | ||
+ | |9.9 | ||
+ | |- | ||
+ | |15 | ||
+ | |0.65 | ||
+ | |9.8 | ||
+ | |- | ||
+ | |12 | ||
+ | |0.85 | ||
+ | |10.2 | ||
+ | |- | ||
+ | |||
|} | |} |
Revision as of 13:42, 2 December 2015
Reference
See Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification Order number H18263-006.
Power Requirements
See page 45 of the above spec. The power requirements are:
- +12-19 volts
- The plug is a 5.5 mm/OD and 2.5 mm/ID.
These are ballpark readings needed to determine estimate supply power requirements. Load was measured under the following conditions. The readings were taken from a current meter using a bench power supply. Current load changes continuously as the Linux processing requirements change. Consider the follow on the low end with peaks at lease 25% higher. All measurements are of low accuracy because the change quickly and were eyeballed.
The following were taken with: keyboard, mouse, wireless, wired, and HTMI monitor.
Activity | Impact (amps) |
---|---|
Boot to desktop | 1.0+ intermittently |
Steady state in desktop | 0.34 to 0.43+ |
Active use of USB webcam | added 0.15 |
Inactive motor controller | added 0.04 |
Camshift rotate demo driving wheels (no load) | 0.57 to 0.66 + |
Supply voltage | Current (amps) | Watts |
---|---|---|
18 | 0.55 | 9.9 |
15 | 0.65 | 9.8 |
12 | 0.85 | 10.2 |