Difference between revisions of "NUC D54250WYK"
(→Power Requirements) |
(→Power Requirements) |
||
Line 34: | Line 34: | ||
|0.57 to 0.66 + | |0.57 to 0.66 + | ||
|} | |} | ||
+ | |||
+ | This test is designed to determine the impact of supply voltage on current requirements. | ||
{| class="wikitable" | {| class="wikitable" | ||
Line 42: | Line 44: | ||
|- | |- | ||
|18 | |18 | ||
− | |0.55 | + | |0.55 + |
|9.9 | |9.9 | ||
|- | |- | ||
|15 | |15 | ||
− | |0.65 | + | |0.65 + |
|9.8 | |9.8 | ||
|- | |- | ||
|12 | |12 | ||
− | |0.85 | + | |0.85 + |
|10.2 | |10.2 | ||
− | |||
− | |||
|} | |} | ||
+ | |||
+ | The steady state power requirements are roughly 10 to 13 watts. A supply that delivers 2A and 18V should provide the required headroom for intermitent spikes. |
Revision as of 13:52, 2 December 2015
Reference
See Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification Order number H18263-006.
Power Requirements
See page 45 of the above spec. The power requirements are:
- +12-19 volts
- The plug is a 5.5 mm/OD and 2.5 mm/ID.
These are ballpark readings needed to determine estimate supply power requirements. Load was measured under the following conditions. The readings were taken from a current meter using a bench power supply. Current load changes continuously as the Linux processing requirements change. Consider the follow on the low end with peaks at lease 25% higher. All measurements are of low accuracy because the change quickly and were eyeballed.
The following were taken with: keyboard, mouse, wireless, wired, and HTMI monitor.
Activity | Impact (amps) |
---|---|
Boot to desktop | 1.0+ intermittently |
Steady state in desktop | 0.34 to 0.43+ |
Active use of USB webcam | added 0.15 |
Inactive motor controller | added 0.04 |
Camshift rotate demo driving wheels (no load) | 0.57 to 0.66 + |
This test is designed to determine the impact of supply voltage on current requirements.
Supply voltage | Current (amps) | Watts |
---|---|---|
18 | 0.55 + | 9.9 |
15 | 0.65 + | 9.8 |
12 | 0.85 + | 10.2 |
The steady state power requirements are roughly 10 to 13 watts. A supply that delivers 2A and 18V should provide the required headroom for intermitent spikes.