Difference between revisions of "Floor Hugger Drive Train"
From wikidb
(→Motors) |
|||
| Line 9: | Line 9: | ||
* 480 pulses per output shaft revolution (I don't think this is correct) | * 480 pulses per output shaft revolution (I don't think this is correct) | ||
* 6 mm shaft | * 6 mm shaft | ||
| + | |||
| + | == Tests == | ||
| + | |||
| + | rostopic pub -1 /cmd_vel geometry_msgs/Twist '[5,0,0]' '[0,0,0]' | ||
| + | |||
| + | {| | ||
| + | ! style="text-align:left;"| Rotations | ||
| + | ! Seconds | ||
| + | ! RPM | ||
| + | |- | ||
| + | |30 | ||
| + | |11.4 | ||
| + | |158 | ||
| + | |- | ||
| + | |50 | ||
| + | |18.4 | ||
| + | |163 | ||
| + | |- | ||
| + | |40 | ||
| + | |14.5 | ||
| + | |165 | ||
| + | |- | ||
| + | |25 | ||
| + | |9.3 | ||
| + | |161 | ||
| + | |- | ||
| + | !Average | ||
| + | | | ||
| + | |160 RPM | ||
| + | |} | ||
= Wheels = | = Wheels = | ||
Revision as of 21:30, 5 May 2016
Motors
DCM_1 from roboticsConnection.com
- 12V
- 130 mA
- 175 rmp no load
- Grear redution 1:40
- Quadrature Encoder
- 480 pulses per output shaft revolution (I don't think this is correct)
- 6 mm shaft
Tests
rostopic pub -1 /cmd_vel geometry_msgs/Twist '[5,0,0]' '[0,0,0]'
| Rotations | Seconds | RPM |
|---|---|---|
| 30 | 11.4 | 158 |
| 50 | 18.4 | 163 |
| 40 | 14.5 | 165 |
| 25 | 9.3 | 161 |
| Average | 160 RPM |
Wheels
- 330 mm circumference
- 330 mm/rev * 160 rev/min =>
- 53 m/min or 0.9 m/sec
- 53 m/min / 1610 m/mile * 60 min/hr => 2.0 mph
- Wheeled Platforms "... 1 m/sec is pretty fast for indoor robots."
