Difference between revisions of "ROS Raspberry Pi Demo"
From wikidb
(→Execution) |
(→Setup the .bashrc file) |
||
Line 46: | Line 46: | ||
source /home/ubuntu/catkin_demo/devel/setup.bash | source /home/ubuntu/catkin_demo/devel/setup.bash | ||
+ | == Configure I2C == | ||
+ | |||
+ | I2C is not enabled by default. | ||
+ | |||
+ | sudo i2cdetect -y 1 | ||
+ | Error: Could not open file `/dev/i2c-1' or `/dev/i2c/1': No such file or directory | ||
+ | |||
+ | Edit the boot config file | ||
+ | |||
+ | cd /boot | ||
+ | diff config.txt config.txt.org | ||
+ | 1073,1075c1073 | ||
+ | < dtparam=i2c1=on | ||
+ | < dtparam=i2c_arm=on | ||
+ | < | ||
+ | --- | ||
+ | > #dtparam=i2c_arm=off | ||
= Execution = | = Execution = |
Revision as of 19:52, 24 February 2017
Contents
References
- Raspberry Pi 3 Ubuntu Mate Xenial 16.04 with ROS Kinetic image
- ROS motor controller node for Adafruit motor HAT IE 2348
- Adafruit motor HAT specs
- Adafruit motor HAT documentation
- Adafruit configuring I2C on Raspberry Pi
- ROS Tutorials
Motor Hat Node Installation
These steps have been completed for the catkin_ws dir. I'm starting from scratch for completeness and I don't want to mess up my working catkin_ws
Create the Workspace
cd mkdir -p catkin_demo/src cd catkin_demo/ ls catkin_make ls cd src
Download the motor hat SW
git clone https://github.com/matpalm/ros-motorhat-node
Rename the directory
It is less confusing if the motor hat directory matches the project name. The project name is in CMakeLists.txt.
ls more ros-motorhat-node/CMakeLists.txt mv ros-motorhat-node/ motor_hat
Build the motor hat node
cd .. catkin_make ls devel/lib/motor_hat/
Setup the .bashrc file
Add the following to your ~/.bashrc
source /home/ubuntu/catkin_demo/devel/setup.bash
Configure I2C
I2C is not enabled by default.
sudo i2cdetect -y 1 Error: Could not open file `/dev/i2c-1' or `/dev/i2c/1': No such file or directory
Edit the boot config file
cd /boot diff config.txt config.txt.org 1073,1075c1073 < dtparam=i2c1=on < dtparam=i2c_arm=on < --- > #dtparam=i2c_arm=off
Execution
Demo the ROS installation.
terminal 1
roscore
terminal 2
cd catkin_ws/ source devel/setup.bash rosrun motor_hat motor_hat_node
terminal 3
rosnode list rostopic list rostopic echo cmd
terminal 4
cd catkin_ws/ source devel/setup.bash rosrun motor_hat stop.py rosrun motor_hat on.py
TBD - QUESTION - Why isn't the message often not received by the motor_hat_node?
Code Inspection
The next line can be added to ~/.bashrc.
source ~/catkin_ws/devel/setup.bash roscd hat_node pwd cd src ls
Look at the code
emacs on.py& emacs motor_hat_node_cpp&
If emacs isn't installed use nano.
nano on.py