Difference between revisions of "Joule Linux Reinstall June 2019"
From wikidb
(→Install) |
(→Install ROS) |
||
| Line 25: | Line 25: | ||
** Turned Lock off | ** Turned Lock off | ||
= Install ROS = | = Install ROS = | ||
| + | |||
| + | * [http://emanual.robotis.com/docs/en/platform/turtlebot3/joule_setup/#install-linux-ubuntu Install ROS] section 6.2.2.2 Intel Joule 270x | ||
Revision as of 20:54, 4 June 2019
Why
Screwed up Linux while working on the Open Manipulator. I messed up the Linux upgrade to match the OpenCR waffle version. Decided to use my old 16.04 install USB dongle to bring things to a know consistent state. Not interested in supporting the Joule long term but to preserve a demo system while exploring ROS 2 on an alternative processor.
References
Install Ubuntu
- Unplugged LIDAR from TB3 USH hub
- Plugged in the Joule Unubutu Install USB image into the Hub
- Rebooted
- Tapped F7 until the installed booted up
- See step by Step instructions above for details
Fix Problems
- Did the Bay Trail Freeze fix
- On Brightness & Lock setting screen
- Set "Turn screen off when inactive" to Never
- Turned Lock off
Install ROS
- Install ROS section 6.2.2.2 Intel Joule 270x
