Difference between revisions of "Intel Movidius 2 Foxy 20210601"
(→2. Environment Setup) |
(→2. Environment Setup) |
||
Line 87: | Line 87: | ||
$ cd l_openvino_toolkit_p_2021.3.394/ | $ cd l_openvino_toolkit_p_2021.3.394/ | ||
− | |||
− | |||
$ sudo ./install.sh | $ sudo ./install.sh | ||
+ | |||
+ | The above install displays a detailed license, other info and installation choices. I selected defaults. Follow link for details. | ||
+ | |||
+ | * [[Intel OpenVeno 2021 for Foxy 20210611]] | ||
+ | |||
-------------------------------------------------------------------------------- | -------------------------------------------------------------------------------- |
Revision as of 12:30, 21 June 2021
Contents
Comment
The Movidius Neural Compute Stick 2 requires OpenVINO toolkit. So the install is little more of a challenge. I haven't gotten the Foxy Demos to compile yet.
References
Hardware
ROS 2 support
- Started Here: ROS 2 Documentation
- Expand "Related Projects" in left panel. Select:: Intel ROS2 Projects
- In "Key Projects" section select: ROS 2 Intel Movidius NCS
It states: "Warning: This repo is depreciated. For latest ROS2 wrapper for Movidius NCS, please refer to our project ros2_openvino_roolkit.
- See: ros2 openvino toolkit
- In the "Installation $ Launching" section see "ROS2 Foxy": ROS2 Foxy OpenVINO_ Tookit
ROS2 OpenVINO Toolkit - Getting Started with Foxy
1. Install ROS2 Foxy from source code
Update cmake 3.14
I'm at 3.16
$ cmake --version cmake version 3.16.3 CMake suite maintained and supported by Kitware (kitware.com/cmake).
Install ROS2 Foxy
I've already installed this from binary. I hope that is ok. I skip this.
2. Environment Setup
Install OpenVINO
- See "guide" link: The Intel Distribution of OpenVINO Toolkit
- Operating System "Linux"
- Distribution: We & Local (recommended)
- Version Type: 2021.3 (latest) -
- TBD: Explore this decision: I tried 2020.3 but it didn't work.
- I maybe able to have both installed in /opt/intel/ and just source the script in the respective /ope/intel/<INSTALL_DIR>/bin
- Installer Type: Local
- Press the "Download" button and choose to put it in my "Download" directory
This is a summary of the installation instructions
----------------------------------- ------- installation instruction ------------------------------------ The following steps apply to Ubuntu*, CentOS*, Red Hat* Enterprise Linux*, and Yocto* versions of Linux. Step 1: Open a command prompt terminal window. Step 2: Unpack the .tgz file. tar -xvzf l_openvino_toolkit_p_<version>.tgz Step 3: Go to the l_openvino_toolkit_p_<version> directory: cd l_openvino_toolkit_p_<version> Step 4: Choose your installation option. GUI Installation Wizard: sudo ./install_GUI.sh Command-Line Instructions: sudo ./install.sh Step 5: Follow the instructions in the installer. Step 6: The core components are installed. To complete the configuration, follow the instructions in the Complete Installation Guide.
$ mkdir openvino $ cd openvino $ tar -xvzf ~/Downloads/l_openvino_toolkit_p_2021.3.394.tgz ... ... $ cd l_openvino_toolkit_p_2021.3.394/
$ sudo ./install.sh
The above install displays a detailed license, other info and installation choices. I selected defaults. Follow link for details.
-------------------------------------------------------------------------------- Initializing, please wait... -------------------------------------------------------------------------------- ... ... The following components will be installed: Inference Engine 219MB Inference Engine Development Kit 66MB Inference Engine Runtime for Intel® CPU 30MB Inference Engine Runtime for Intel® Processor Graphics 18MB Inference Engine Runtime for Intel® Movidius™ VPU 83MB Inference Engine Runtime for Intel® Gaussian Neural Accelerator 13MB Inference Engine Runtime for Intel® Vision Accelerator Design with 15MB Intel® Movidius™ VPUs Model Optimizer 5MB Model Optimizer Tool 5MB Post-Training Optimization Tool 66MB Post-Training Optimization Tool 66MB Deep Learning Workbench 157MB Deep Learning Workbench 157MB OpenCV* 101MB OpenCV* Libraries 90MB Open Model Zoo 250MB Open Model Zoo 250MB Intel(R) Media SDK 157MB Intel(R) Media SDK 157MB DL Streamer 240MB DL Streamer 155MB Install space required: 849MB -------------------------------------------------------------------------------- 1. Accept configuration and begin installation [ default ] 2. Customize installation h. Help b. Back q. Quit installation -------------------------------------------------------------------------------- Please type a selection or press "Enter" to accept default choice [ 1 ]: -------------------------------------------------------------------------------- ... ... ... Finalizing product configuration... -------------------------------------------------------------------------------- First Part of Installation is Complete -------------------------------------------------------------------------------- The first part of Intel® Distribution of OpenVINO™ toolkit 2021.3 for Linux* has been successfully installed in /opt/intel/openvino_2021.3.394. ADDITIONAL STEPS STILL REQUIRED: Open the Installation guide at: https://docs.openvinotoolkit.org/2021.3/_docs_install_guides_installing_openvino_linux.html and follow the guide instructions to complete the remaining tasks listed below: • Set Environment variables • Configure Model Optimizer • Run the Verification Scripts to Verify Installation and Compile Samples -------------------------------------------------------------------------------- Press "Enter" key to quit:
Install Intel RealSense SDK 2.0 - tag v2.30.0
I think I did this: See
I hope I'm done with "2 Enviornment Setpu"
3. Building and Installation
Important Note This section was transcribed incorrectly FIX
Build Demo Code in OpenVINO Toolkit
$ su
In root
# source /opt/intel/openvino_2021.3.394/bin/setupvars.sh [setupvars.sh] OpenVINO environment initialized # cd /opt/intel/openvino_2021.3.394/deployment_tools/open_model_zoo/demos/ # source build_demos.sh Setting environment variables for building demos... [setupvars.sh] OpenVINO environment initialized -- The C compiler identification is GNU 9.3.0 ... ... ... ... [ 99%] Built target object_detection_demo [100%] Linking CXX executable ../../intel64/Release/classification_demo [100%] Built target classification_demo Scanning dependencies of target ie_samples [100%] Built target ie_samples Build completed, you can find binaries for all demos in the /root/omz_demos_build/intel64/Release subfolder.
Get out of root - I think that is what I should do
Check Disk Usage
$ df Filesystem 1K-blocks Used Available Use% Mounted on udev 8133636 0 8133636 0% /dev tmpfs 1632492 1660 1630832 1% /run /dev/sda1 114854020 23423452 85553220 22% / ...
Install ROS2_OpenVINO Packages
$ mkdir -p vino_ros2_ws/src $ cd vino_ros2_ws/src/ $ git clone https://github.com/intel/ros2_openvino_toolkit Cloning into 'ros2_openvino_toolkit'... ... $ git clone https://github.com/intel/ros2_object_msgs Cloning into 'ros2_object_msgs'... ... $ git clone https://github.com/ros-perception/vision_opencv -b ros2 Cloning into 'vision_opencv'... ... $ git clone https://github.com/ros2/message_filters.git Cloning into 'message_filters'... ... $ git clone https://github.com/ros-perception/image_common.git -b dashing Cloning into 'image_common'... .. $ git clone https://github.com/intel/ros2_intel_realsense.git -b refactor Cloning into 'ros2_intel_realsense'... ...
Note See the 5th git for image_common.git. I suspect the doing the image_common.git in branch dashing is OK. Besides, I couldn't do it in a foxy branch. There may not be one?
Build Package
- FAILS
- Note: This must be build the ROS 2 wrapper step.
- Note: Didn't source foxy local_setup.bash because that is done in my .bashrc script
- Note: cd'ed into the vino_ros2_ws project root (~/vino_ros2_ws). This is the standard place to do a build. I tried doing it in the src sub-directory as well but it didn't help. I've seen this work in the src directory equally well. The install directory ends up in the src directory. Is this really what they want?
- Note: There is a soft link from penvino_2021 to openvino_2021.3.394. Should make a difference which one I source.
- Note: I wonder if the problem is using OpenVINO 2021 instead of 2020.
$ source /opt/intel/openvino_2021.3.394/bin/setupvars.sh [setupvars.sh] OpenVINO environment initialized # Put myself into ~/vino_ros2_ws $ cd .. $ colcon build --symlink-install Starting >>> cv_bridge Starting >>> object_msgs Starting >>> realsense_msgs Starting >>> vino_param_lib ... ... --- Failed <<< image_transport [47.3s, exited with code 2] Aborted <<< people_msgs [1min 27s] Summary: 13 packages finished [4min 14s] 1 package failed: image_transport 1 package aborted: people_msgs 3 packages had stderr output: image_transport realsense_ros vino_param_lib 4 packages not processed
TBD: Figure out what went wrong.
4. Running the Demo
TBD