Difference between revisions of "Wview"
From wikidb
(→Set up) |
|||
Line 27: | Line 27: | ||
*** Station Latitude: 45.55 | *** Station Latitude: 45.55 | ||
*** Station Longitude: -122.65 | *** Station Longitude: -122.65 | ||
+ | * File Generation tab | ||
+ | ** Name/Location | ||
+ | *** Station Name: zdome | ||
+ | *** Station City: Portland | ||
+ | *** Station State: Oregon | ||
+ | == System Status Snapshot == | ||
+ | |||
+ | [[Image:Example.jpg]] | ||
== Links == | == Links == |
Revision as of 12:34, 9 November 2014
So far unsuccessful
Raspberry Pi
Couldn't get it going on Whezzy.
fit2pc
Tried Ubuntu on fit2pc.
Made sure all the dependencies on Henrik site were installed
sudo apt-get install --yes build-essential zlib1g-dev libpng12-dev libreadline-dev gawk libsqlite3-dev sqlite3 libgd2-xpm \ libgd2-xpm-dev libssl-dev sendmail sendemail libcurl4-openssl-dev libusb-1.0-0 libusb-1.0-0-dev \ apache2 php5 php5-sqlite libapache2-mod-php5 ntp tnftp wget
Set up
In browser went to 10.0.0.176/wviewmgmt/login.php
- Stations tab
- Communication
- Station type: Oregon Scientific WMRUSB
- Location
- Station Elevation (feet): 170
- Station Latitude: 45.55
- Station Longitude: -122.65
- Communication
- File Generation tab
- Name/Location
- Station Name: zdome
- Station City: Portland
- Station State: Oregon
- Name/Location
System Status Snapshot
Links
- view manual.
- wmrx00 Sourceforge.
- RaspberryPi Wview Weather Station.
- USING A RASPBERRY PI FOR SENDING WEATHER DATA TO WEATHER UNDERGROUND WITH WVIEW Henrik Vretare.
- Installing wview on Raspberry Pi.
- Connecting my Oregon Scientific WMR88 Weather Station to Wunderground using a Raspberry Pi.
- Using wview to monitor the weather on your own weather station.