Turtlebot3 Raspberry Pi Wireless Issue 20210118

From wikidb
Revision as of 15:08, 20 January 2021 by Edc (Talk | contribs)

Jump to: navigation, search

What Happed to Wifi

Reorganize Random exploration 

 ls /sys/class/net
       eth0  lo

ubuntu@ubuntu:/etc/netplan$ sudo netplan --debug apply
** (generate:5701): DEBUG: 18:10:24.479: Processing input file /etc/netplan/50-cloud-init.yaml..
** (generate:5701): DEBUG: 18:10:24.480: starting new processing pass
** (generate:5701): DEBUG: 18:10:24.481: wlan0: adding wifi AP 'zdome'
** (generate:5701): DEBUG: 18:10:24.481: We have some netdefs, pass them through a final round of validation
** (generate:5701): DEBUG: 18:10:24.481: wlan0: setting default backend to 1
** (generate:5701): DEBUG: 18:10:24.481: Configuration is valid
** (generate:5701): DEBUG: 18:10:24.481: eth0: setting default backend to 1
** (generate:5701): DEBUG: 18:10:24.481: Configuration is valid
** (generate:5701): DEBUG: 18:10:24.482: Generating output files..
** (generate:5701): DEBUG: 18:10:24.482: NetworkManager: definition eth0 is not for us (backend 1)
** (generate:5701): DEBUG: 18:10:24.482: Creating wpa_supplicant config
** (generate:5701): DEBUG: 18:10:24.482: wlan0: Creating wpa_supplicant configuration file run/netplan/wpa-wlan0.conf
** (generate:5701): DEBUG: 18:10:24.482: Creating wpa_supplicant unit /run/systemd/system/netplan-wpa-wlan0.service
** (generate:5701): DEBUG: 18:10:24.492: Creating wpa_supplicant service enablement link /run/systemd/system/systemd-networkd.service.wants/netplan-wpa-wlan0.service
** (generate:5701): DEBUG: 18:10:24.493: NetworkManager: definition wlan0 is not for us (backend 1)
DEBUG:netplan generated networkd configuration changed, restarting networkd
DEBUG:no netplan generated NM configuration exists
DEBUG:eth0 not found in {}
DEBUG:wlan0 not found in {}
DEBUG:Merged config:
network:
  bonds: {}
  bridges: {}
  ethernets:
    eth0:
      dhcp4: true
      dhcp6: true
      optional: true
  vlans: {}
  wifis:
    wlan0:
      access-points:
        zdome:
          password: fishsticks
      dhcp4: true
      dhcp6: true

DEBUG:Skipping non-physical interface: lo
DEBUG:device eth0 operstate is up, not changing
DEBUG:{}
DEBUG:netplan triggering .link rules for lo
DEBUG:netplan triggering .link rules for eth0
Warning: The unit file, sourcesudo netplan --debug apply configuration file or drop-ins of netplan-wpa-wlan0.service changed on disk. Run 'systemctl daemon-reload' to reload units.



 $ systemctl daemon-reload
       ==== AUTHENTICATING FOR org.freedesktop.systemd1.reload-daemon ===
       Authentication is required to reload the systemd state.
       Authenticating as: Ubuntu (ubuntu)
       Password: 
       ==== AUTHENTICATION COMPLETE ===


ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ ls /sys/class/net eth0 lo ubuntu@ubuntu:~$



/sys/class/net no wireless


ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ sudo netplan apply Warning: The unit file, source configuration file or drop-ins of netplan-wpa-wlan0.service changed on disk. Run 'systemctl daemon-reload' to reload units. Warning: The unit file, source configuration file or drop-ins of netplan-wpa-wlan0.service changed on disk. Run 'systemctl daemon-reload' to reload units. ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ sudo netplan generate ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ sudo netplan apply Warning: The unit file, source configuration file or drop-ins of netplan-wpa-wlan0.service changed on disk. Run 'systemctl daemon-reload' to reload units. ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ systemctl daemon-reload

= AUTHENTICATING FOR org.freedesktop.systemd1.reload-daemon

Authentication is required to reload the systemd state. Authenticating as: Ubuntu (ubuntu) Password:

= AUTHENTICATION COMPLETE

ubuntu@ubuntu:~$


reboot - didn't help


https://huobur.medium.com/how-to-setup-wifi-on-raspberry-pi-4-with-ubuntu-20-04-lts-64-bit-arm-server-ceb02303e49b


How to Setup WiFi on Raspberry Pi 4 with Ubuntu 20.04 LTS 64-bit ARM Server



Ubuntu 20.04: Connect to WiFi from command line https://linuxconfig.org/ubuntu-20-04-connect-to-wifi-from-command-line

ubuntu@ubuntu:~/turtlebot3_ws/src/turtlebot3/turtlebot3$ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 

   link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
   inet 127.0.0.1/8 scope host lo
      valid_lft forever preferred_lft forever
   inet6 ::1/128 scope host 
      valid_lft forever preferred_lft forever

2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 

   link/ether b8:27:eb:0b:5d:ce brd ff:ff:ff:ff:ff:ff
   inet 10.0.0.186/24 brd 10.0.0.255 scope global dynamic eth0
      valid_lft 78973sec preferred_lft 78973sec
   inet6 fe80::ba27:ebff:fe0b:5dce/64 scope link 
      valid_lft forever preferred_lft forever

Navigation menu EdcTalkPreferencesWatchlistContributionsLog out PageDiscussionReadEditView history

Main Page ROS2 NUC on TB3 FTC 2020 ROS ROS Map Survey Ubuntu Tips Backup Navigation Community portal Current events Recent changes Random page Help sitesupport Tools


Notes and Logs

Retrieved from "http://zdome.net/wiki/index.php?title=Turtlebot3_Raspberry_Pi_Wireless_Issue_20210118&oldid=6447"