Sisters Install ROS
From wikidb
Contents
References
- Overview
- ROS PC Setup I followed these instructions and recorded steps below.
Install ROS
Install Kenetic
cd sudo apt-get update sudo apt-get upgrade wget https://raw.githubusercontent.com/ROBOTIS-GIT/robotis_tools/master/install_ros_kinetic.sh && chmod 755 ./install_ros_kinetic.sh && bash ./install_ros_kinetic.sh
reboot
Install TurtleBot3
sudo apt-get install ros-kinetic-joy ros-kinetic-teleop-twist-joy ros-kinetic-teleop-twist-keyboard ros-kinetic-laser-proc ros-kinetic-rgbd-launch ros-kinetic-depthimage-to-laserscan ros-kinetic-rosserial-arduino ros-kinetic-rosserial-python ros-kinetic-rosserial-server ros-kinetic-rosserial-client ros-kinetic-rosserial-msgs ros-kinetic-amcl ros-kinetic-map-server ros-kinetic-move-base ros-kinetic-urdf ros-kinetic-xacro ros-kinetic-compressed-image-transport ros-kinetic-rqt-image-view ros-kinetic-gmapping ros-kinetic-navigation ros-kinetic-interactive-markers
cd ~/catkin_ws/src/ git clone https://github.com/ROBOTIS-GIT/turtlebot3_msgs.git git clone https://github.com/ROBOTIS-GIT/turtlebot3.git cd ~/catkin_ws && catkin_make
Git Run Scripts
TurtleBot3_Run_Scripts: I created these with the VirualBox install.
git clone https://github.com/edcepp/tr3host
Environment Settings
- Make sure the ~/.bashrc ROS_MASTER, ROS_HOSTNAME and TURTLEBOT3_MODEL are set
- Add the directory ~/catkin_ws/src/tr3host/maps
- Check the joystick in teleop.launch in the launch directory is set correctly
Disk Footprint
For Dual Boot on Windows
- Pre ROS Install
- available /dev/sda7 at 82,876,464 KB
- used 4,935,684 (6%)
- Post ROS Install
- used 8,464,020 (10%)
For VirualBox on Windows
- Pre ROS Install
- available /dev/sda1 at 22,554,656 KB (30 GB)
- used 4,571,816 (4.5 GB) 17%
- Post ROS
- used 8,088,568 (8.1 GB) 29%