Difference between revisions of "Turtlebot3 ROS2"
From wikidb
(→Test Core Capabilities) |
(→Navigation) |
||
| Line 47: | Line 47: | ||
* [[Hood NUC Install, Test and Configure Cartographer 202006]] | * [[Hood NUC Install, Test and Configure Cartographer 202006]] | ||
| + | * [[Hood NUC Master and Sisters Client 202006]] | ||
* [[Hood NUC Run Cartographer 202006]] | * [[Hood NUC Run Cartographer 202006]] | ||
* [[Hood NUC Navigation 202006]] | * [[Hood NUC Navigation 202006]] | ||
Revision as of 16:36, 17 July 2020
Contents
Environment
Turtlebot3 R0S 2 Version Details
- Ubuntu 18.04.3 LTS Bionic Beaver
- ROS2 Dashing
- Turtlebot3
- OpenCR
- HW R1.0
- FW waffle V190829R3
References
Waffle Modifications
Software Setup
Ubuntu Setup on Hood
OpenCR Setup
- Hood OpenCR Firmware Version V190829R3 Install Rototis instructions
ROS 2 Install on Hood
- Hood NUC ROS2 Dashing Binary 202002
- Hood NUC ROS2 Dashing Configuration 202004
- Hood NUC Navigation 2 Dashing Binary 202003 and Turtlebot3
- Hood NUC ROS2 Dashing Configuration 202004
Test Core Capabilities
- Hood NUC Bringup 2 Dashing 202003 Keyboard teleop and RViz
- Hood RC100 Controller 202006
- Hood NUC ROS2 Joystick 202004
- Hood NUC RealSense D400 Series 202004
- Hood NUC Install, Test and Configure Cartographer 202006
- Hood NUC Master and Sisters Client 202006
- Hood NUC Run Cartographer 202006
- Hood NUC Navigation 202006
Tutorials
Work Space
Depreciated Intel Source Install
- Hood NUC ROS2 Binary install to /opt/ros
Based on the Intel Navigation 2 team
- Hood NUC Melih ROS2 Source Install
- Hood NUC Melih Gazebo Install
- Hood NUC Melih ROS2 Navigation 2 Install
- Hood NUC Melih ROS2 TB3 Install
- Hood NUC Melih ROS2 TB3 Bringup and Test
- Robotis Basic Operation TBD
From Tutlebot3 Robotis e-Manual
Tools
- Hood NUC ROS2 rviz
- Hood NUC ROS2 *** TBD *** clean up this page and redistribute
Quick Start Notes
Depreciated Other
- Hood OpenCR 1.0.4 ROS2 Firmware Install or V190730R1
These next steps were based on Raspberry Pi instructions. They didn't work here. So I moved to Melih Erdogan's instructions. See Setup section above.
- Hood OpenCR Waffle Drivers ROS2 Micro XRCE DDS Agent Install (this may also be a part of the next step?)
- Hood Turtlebot3 ROS2
- Hood Install Core Hardware Support
- Hood Turtlebot3 Bringup Test
- Hood Turtlebot3 Bringup Test Still won't work
